■ Wall Sealer is the first coat that is applied onto a new or repainted surface.
■ It penetrates and helps to seal the wall surface.
Why use a Wall Sealer?
■ Protects the paint against alkalinity and moisture on walls.
■ To help prevent efflorescence on the wall surface for longer lasting colours.
■ Promotes better adhesion between the substrate and the top coat.
Wall Sealers provide protection against
1. Flaking & peeling
2. Discolouration
3. Efflorescence
Nippon Paint offers you range 5 wall sealers, where each sealer is designed to tackle
a particular substrate. Choose the right sealer and you are on your way to a longer lasting beautiful home. It is available at all our dealers’ outlets.
For more information, please contact us at 03-51250888.
Acrylic 5170
What is Nippon Acrylic 5170 Wall Sealer?
Nippon Acrylic 5170 Wall Sealer is a vinyl acrylate solvent-based sealer. It is specially formulated to protect the finishing coats against the effect of alkalinity and moisture from the walls. It is best used on interior and exterior walls, brickwork, plaster and asbestos free substrate.
■ Promotes better adhesion
■ Good alkaline resistance
■ Good for chalky and powdery surface
■ Good efflorescence resistance
Note: For longer-lasting results,
use 1 coat of primer and finish
with at least 2 coats from any
product in the Nippon Paint
premium range. For Timber Finish,
please finish with 3 coats and
there is no need for primer.
Hi-Bond
What is Nippon Hi-Bond Wall Sealer?
Nippon Hi-Bond Wall Sealer is a styrene acrylate copolymer solvent-based wall sealer. It is specifically formulated for painting directly on difficult surfaces such as skimcoat interior walls and plaster ceilings to enhance intercoat bonding for the finishing topcoat.
■ Excellent for plaster ceilings, skim coat and repainting on powdery surface
■ Blocks waterborne stains
Note: For longer-lasting results,
use 1 coat of primer and finish
with at least 2 coats from any
product in the Nippon Paint
premium range. For Timber Finish,
please finish with 3 coats and
there is no need for primer.
Vinilex 5200
What is Nippon Vinilex 5200 Wall Sealer?
Nippon Vinilex 5200 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated for interior walls to protect the finishing coats against the effects of mild alkalinity and moisture from the substrate. It is best used on interior walls, plastered walls, ceilings, brickwork, hard and softboard and asbestos.
■ Good for smooth walls
■ Promotes better leveling for top coat
Note: For longer-lasting results,
use 1 coat of primer and finish
with at least 2 coats from any
product in the Nippon Paint
premium range. For Timber Finish,
please finish with 3 coats and
there is no need for primer.
Odour-less
What is Nippon Odour-less Wall Sealer?
Nippon Odour-less Wall Sealer is a specially formulated styrene acrylic water-based wall sealer with exceptionally low odour for interior use. This new breakthrough formulation contains low Volatile Organic Compound (VOC) levels, so you will experience little paint odour during and after painting. It is best used with Nippon Odour-less emulsion paint, and on interior walls, plastered walls, ceiling, brickwork, hard and softboard, and asbestos.
■ Low Odour
■ Promotes better leveling for top coat
Note: For longer-lasting results,
use 1 coat of primer and finish
with at least 2 coats from any
product in the Nippon Paint
premium range. For Timber Finish,
please finish with 3 coats and
there is no need for primer.
Vinilex 5100
What is Nippon Vinilex 5100 Wall Sealer?
Nippon Vinilex 5100 Wall Sealer is a styrene acrylic water-based wall sealer. It is specially formulated to protect the finishing coats against the effects of mild alkalinity and efflorescence. It is best used on exterior walls, plastered walls, ceilings, brickwork, hard and softboard and asbestos.
■ Good efflorescence resistance
■ Good for new walls and repainting
Note: For longer-lasting results,
use 1 coat of primer and finish
with at least 2 coats from any
product in the Nippon Paint
premium range. For Timber Finish,
please finish with 3 coats and
there is no need for primer.
