Interior floor holes should not be ignored. These gaps can trap dust, dirt, and moisture, potentially leading to unpleasant odours, staining, or even mould growth. Over time, they may weaken the floor surface, create uneven areas, and pose tripping hazards, making the space look worn and poorly maintained. With Nippon Paint Bare-to-Finish Solution for Holes in Floors, affected areas are properly repaired and reinforced, helping you maintain a durable and visually appealing floor for your most beautiful home.
Prepare the surface by cleaning and removing debris to ensure an optimal base for long-lasting performance. Lightly wet the hole before patching.
CMI® NS FibrePatch 228
Apply mortar to the holes or damaged areas to fill in the visible gaps. This step helps repair the surface and makes it strong again.
Abrasive Waterproof Sandpaper
Lightly sand the surface to even out imperfections and ensure strong bonding for the next coating layers.
Penetrative Epoxy Primer
Apply an even coat of epoxy primer to reinforce the weakened substrate and enhance adhesion for subsequent layers.
EA4 Finish
Evenly apply the first topcoat to provide initial protection against corrosion, abrasion, and mechanical damage.
EA4 Finish
Apply the second topcoat to build a fully cured epoxy layer that provides enhanced resistance to surface damage.
Using unsuitable repair materials can lead to repeated repairs and higher maintenance costs. Nippon Paint’s Bare-to-Finish Solution for Interior Floor Hole Repair follow a structured bare-to-finish approach, ensuring strong adhesion and long-lasting performance. Hear from the Nippon Paint House Pakar on how the right system improves floor durability.
Let Nippon Paint House Pakar tell you all about repairing interior floor holes from bare to finish.
Holes can happen on interior floors due to drilling, movement of building materials and moisture seepage from internal areas. Nippon Paint’s Bare-to-Finish Solutions are essential for covering up interior floor imperfections and creating an aesthetic and durable floor finish.
Drilling or removing fixtures can mechanically damage the paint film and underlying substrate. The force applied may create cracks, chips, or localised stress, weakening adhesion and eventually causing cracking, lifting, or peeling around the affected areas.
As buildings adjust to heat, cold, and daily weight, walls and floors naturally move. This can lead to small cracks that gradually grow into noticeable holes.
Plumbing leaks, spills, and excess indoor humidity can gradually damage plaster and concrete surfaces, causing them to soften, crumble, and form small holes.
Repairing interior floor holes requires more than just surface patching. Without the right preparation and compatible materials, the repair may loosen under foot traffic, collect dust, or lead to further cracking around the damaged area. Nippon Paint’s Bare-to-Finish Solutions can provide good coverage of existing interior floor holes, and ensure a uniform finish that withstands daily wear.
Explore our recommended system solutions or speak to a Nippon Paint expert to find the right approach for your home.
Note: The colour shades displayed are indicative and not precise representations of our actual paint colours.
© 2026 NIPPON PAINT (MALAYSIA) SDN. BHD. (196701000578) All Rights Reserved
