Back
Find Products
Review our dynamic collection
EA4 Finish
NIPPON PAINT EA4 FINISH (EP) is a two-pack polyamide cured epoxy finish for use on primed steel surface where chemical, oil and abrasion resistant coating is required. It is recommended for non-immersion services. If it is to be applied over steel, it has to be used in combination with the appropriate primers as recommended below.
Product Features:
- Good resistance to abrasion and mechanical damage
- Excellent on correctly prepared and primed surfaces
- Dry service temperature up to 100°C
Scroll for more colours
Coating System
| Steel | ||
|---|---|---|
| Type | Product Name | No. of Coat(s) |
| Sealer / Primer | Nippon Paint 8048 Zinc Phosphate Primer QD | 1 coat |
| Under Coat | Nippon Paint 8048 | 1 coat |
| Topcoat | Nippon Paint EA4 Finish (EP) | 1 coat |
Application Data
Application
Brush, Roller, Airless Spray, Compressed Air Spray
Thinning
Thin up to 10% by volume of SA-65 Thinner
Touch Dry / Hard Dry
2 - 3 hours / 16 hours
Recoating Interval
Minimum 16 hours
Theoretical Coverage
6.4 - 10.2 m² per liter per coat
Products you may like
