Primer
Nippezinc E2 Primer
Epoxy primer for abrasive blasted steel surfaces for marine and heavy industrial use
Nippon Paint Nippezinc E2 Primer is a two-pack epoxy zinc primer for use on abrasive-blasted steel. As a primer, it delivers long term protection of steelwork and is ideal for marine and heavy industrial use.
Product Type
Paint Type
Finishing
Product Features
Recommended Number of Coats
1 Coat
Drying Time
Touch Dry:Approximately 10 Minutes
Hard Dry:4 Hours
Methods of Thinning
Brush/Roller: Dilute with maximum 5% of Nippezinc EP 7902 Thinner, if necessary
Compressed Air Spray: Dilute with about 10-15% of Nippezinc EP 7902 Thinner, if necessary
Airless Spray: Maximum 5% of Nippezinc EP 7902 Thinner
Recoating Time
Minimum 8 Hours
Coverage
12 m2 per litre per coat: dry film thickness of 50 microns
7.5 m2 per litre per coat: dry film thickness of 80 microns
Method of Application
Brush, Roller, Compressed Air Spray, Airless Spray
Nippon Paint Nippezinc E2 Primer offers reliable anti-rust protection on iron and steel surfaces used in marine and heavy industrial areas. With the epoxy zinc coating, it ensures a durable priming layer before the painting process. Its zinc dust pigment complies with ASTM D520 (Type II) requirements, helping provide a strong protective foundation for subsequent coating systems.
Shields metal from moisture and oxidation, preventing rust and corrosion. It enhances the appearance and gives long-lasting protection for metals.
Perfect your finish with our system by using the right combination of products and tools
Epoxy primer for abrasive blasted steel surfaces for marine and heavy industrial use
View productNote: The colour shades displayed are indicative and not precise representations of our actual paint colours.
© 2026 NIPPON PAINT (MALAYSIA) SDN. BHD. (196701000578) All Rights Reserved
