Paint peeling can reduce the durability and lifespan of interior fixtures such as window frames, doors, staircases, and fittings. Without proper coating protection, these surfaces become more vulnerable to scratches, impact, humidity, and temperature changes. Nippon Paint’s Bare-to-Finish Solutions for Paint Peeling on Interior Fixtures help enhance durability while improving the overall appearance of the interior space of your most beautiful home.
Completely remove any loose paint film and clean the surface of dirt, grease, and contaminants. Ensure the surface is fully dry before painting.
Abrasive Waterproof Sandpaper
Lightly sand the surface to even out imperfections and ensure strong bonding for the next coating layers.
Zinc Phosphate Primer FD
Apply one coat of primer specially formulated for iron and steel surfaces. Protecting the surface against rust and serving as a base for the next coat.
Odourlite Undercoat
As a foundation for the subsequent topcoat, apply one coat of undercoat to provide good hiding and build.
Odourlite Gloss Finish
To prevent recurring damage, apply a high-durability, rust-resistant, and fungus-resistant protective topcoat.
Completely remove any loose paint film and clean the surface of dirt, grease, and contaminants. Ensure the surface is fully dry before proceeding to the next step.
Abrasive Waterproof Sandpaper
Lightly sand the surface to even out imperfections and ensure strong bonding for the next coating layers.
1K Etching Primer
Apply one coat of primer specially formulated for iron and steel surfaces, protecting the surface against rust and serving as a base for the next coat.
Odourlite Undercoat
Apply one coat of undercoat to provide good hiding and build, serving as an optimal foundation for subsequent coatings.
Odourlite Gloss Finish
To prevent recurring damage, apply a high-durability, rust-resistant, and fungus-resistant protective topcoat.
Completely remove any loose paint film and clean the surface of dirt, grease, and contaminants. Ensure the surface is fully dry before proceeding to the next step.
Abrasive Waterproof Sandpaper
Lightly sand the surface to even out imperfections and ensure strong bonding for the next coating layers.
Hydro Wood & Metal Primer
Apply one coat of primer specially formulated for wood and metal surfaces to improve adhesion before the next application. (Only applicable when using Hydro Finish)
1 Pack PU Timbercoat
Apply the topcoat to provide the final layer of colour and protection, using a pigmented varnish to enhance the natural wood grain.
Hydro Finish
Apply the topcoat to protect the surface from bacterial growth while achieving a smooth, vibrant colour finish.
To prevent paint peeling on home components like doors and windows, it’s essential to use products that are compatible with each surface. Nippon’s Paint Bare-to-Finish Solutions provide the right combination of primers, paints, and finishing coats specifically formulated for wood, metal, or composite materials. Using compatible products ensures strong adhesion, smooth coverage, and long-lasting protection, reducing the risk of peeling, cracking, or flaking while keeping your doors and windows looking pristine.
Let Nippon Paint House Pakar tell you all about preventing paint peeling from bare to finish.
Peeling and flaking of paint can weaken the surface protection ability. When the paint film is exposed to moisture, dirt, and daily wear, this can lead to swelling, warping, rusting, or surface deterioration over time. Nippon Paint’s Bare-to-Finish Solution is necessary to enhance durability, and prevents recurring peeling over time.
If surfaces aren’t properly cleaned and primed, paint may peel over time. Always ensure the surface is clean, dry, and dust-free, and apply a suitable primer for better adhesion and a longer-lasting finish.
When water gets trapped under the paint, it can loosen the bond and cause peeling. Changes in temperature also make walls expand and shrink, putting stress on the paint layer. Over time, this movement can cause the paint to crack and peel.
Make sure the sealers, primers, and paints you use are designed to work together. Different paint types have different properties, and mixing them wrongly can cause peeling and other problems.
If peeling paint keeps happening, it is often a sign that the right steps or products were missed earlier. By using a complete bare-to-finish solution that is designed to work together, you can repair the damage properly and reduce the risk of peeling happening again. Nippon Paint’s Bare-to-Finish Solutions are created to protect your interior fixtures against moisture and long-term wear, so you can enjoy a smoother finish and longer-lasting results with confidence.
Explore our recommended system solutions or speak to a Nippon Paint expert to find the right approach for your home.
Note: The colour shades displayed are indicative and not precise representations of our actual paint colours.
© 2026 NIPPON PAINT (MALAYSIA) SDN. BHD. (196701000578) All Rights Reserved
